2024 ASTEC Mobile Screens Peterson 4710D Horizontal Grinder Caterpillar C18 Tier IV

Information

2024 ASTEC Mobile Screens Peterson 4710D Horizontal Grinder Caterpillar C18 Tier IV

The 4710D Horizontal Grinder is a track mounted horizontal grinder designed for high-volume producers with very demanding end-product specifications.

Boasting 18 inches (46 cm) of ground clearance—this model is particularly suited for land clearing operations or other applications where mobility and frequent moving is desired. Track mounting also reduces material handling costs in conventional recycling yards as well.

The 4710D Horizontal Grinder is powered by a Tier IV Caterpillar C18 engine rated at 755 horsepower (563 kW). A Tier II (export only), 765 horsepower (570 kW) engine is also available. It features Peterson’s Adaptive Control System, which controls all components of the feed system to optimize output. This system senses variations in the engine load and adapts the operating parameters to produce the maximum amount of material at all times.

Photos

Highlights

  • Kansas City, Kansas
  • 2024
  • ASTEC Mobile Screens
  • Peterson 4710D Horizontal Grinder Caterpillar C18 Tier IV
  • Model: C18 Tier IV
  • Available
  • Operating: 11' | Travel: 9' 10" | Rotor: 64" | Discharge Conveyor: 54"
  • Operating: 16' 8" | Travel: 11' 10" | Discharge Conveyor: 16' 8"

Specifications

  • 2024
  • ASTEC Mobile Screens
  • Peterson 4710D Horizontal Grinder
  • Caterpillar C18 Tier IV
  • General
  • Model: C18 Tier IV
  • Caterpillar
  • C18 Tier IV: 755 hp
  • PT Tech HPTO 15
  • Rotor Speed: 1050 fpm @ 2100 rpm | Conveyor Speed: 500, 600, 700 ft/min | Travel Speed: 1.2/2.3 mph
  • Production Greenwaste: 360 yd³, 95 tons | Production Scrap Board: 425 yd³, 65 tons
  • 11.4 lbs/in²
  • Axle Spacing: 60" | Front Angle of Approach: 11° | Rear Angle of Approach: 22° | Rotor Diameter: 38” | Rotor Shaft Size: 5.9" @ bearing, 7.5" @ center | Bit Size: 2.75" x 5" | Total Grate Area: 28 ft² | Grate Coverage: 187º| Grate Thickness: 1", 1.25"
  • Operating: 56' 9" | Travel: 44' 11" | Frame: 37' 2" | Track: 15' | Front to Track: 14' 10"
  • Operating: 11' | Travel: 9' 10" | Rotor: 64" | Discharge Conveyor: 54"
  • Operating: 16' 8" | Travel: 11' 10" | Discharge Conveyor: 16' 8"
  • 18"
  • 300 US gal
  • 90 US gal
  • Machine: 72,500 lbs
  • Number of Bits: 22 drum rotor, 20 pinned rotor | Number of Grate Sections: 4
  • Track Type & Width: triple grouser, 23.5"