2024 ASTEC Mobile Screens Peterson 4710D Horizontal Grinder Caterpillar C18 Tier II (Export Only)
- Year 2024
- Make ASTEC Mobile Screens
- Model Peterson 4710D Horizontal Grinder
- Engine Model: C18 Tier II (export only)
2024 ASTEC Mobile Screens Peterson 4710D Horizontal Grinder Caterpillar C18 Tier II (Export Only)
2024 ASTEC Mobile Screens Peterson 4710D Horizontal Grinder Caterpillar C18 Tier II (Export Only)
The 4710D Horizontal Grinder is a track mounted horizontal grinder designed for high-volume producers with very demanding end-product specifications.Boasting 18 inches (46 cm) of ground clearance—this model is particularly suited for land clearing operations or other applications where mobility and frequent moving is desired. Track mounting also reduces material handling costs in conventional recycling yards as well.
The 4710D Horizontal Grinder is powered by a Tier IV Caterpillar C18 engine rated at 755 horsepower (563 kW). A Tier II (export only), 765 horsepower (570 kW) engine is also available. It features Peterson’s Adaptive Control System, which controls all components of the feed system to optimize output. This system senses variations in the engine load and adapts the operating parameters to produce the maximum amount of material at all times.
Engine
Engine Manufacturer
Caterpillar
Engine
Model: C18 Tier II (export only)
Engine Power
C18 Tier II (export only): 765 hp
Drivetrain
Clutch
PT Tech HPTO 15
Operational
Operating Speed
Rotor Speed: 1050 fpm @ 2100 rpm | Conveyor Speed: 500, 600, 700 ft/min | Travel Speed: 1.2/2.3 mph
Operating Conditions
Production Greenwaste: 360 yd³, 95 tons | Production Scrap Board: 425 yd³, 65 tons
Ground Pressure
11.4 lbs/in²
Dimensions
Dimensions
Axle Spacing: 60" | Front Angle of Approach: 11° | Rear Angle of Approach: 22° | Rotor Diameter: 38” | Rotor Shaft Size: 5.9" @ bearing, 7.5" @ center | Bit Size: 2.75" x 5" | Total Grate Area: 28 ft² | Grate Coverage: 187º| Grate Thickness: 1", 1.25"
Length
Operating: 56' 9" | Travel: 44' 11" | Frame: 37' 2" | Track: 15' | Front to Track: 14' 10"
Width
Operating: 11' | Travel: 9' 10" | Rotor: 64" | Discharge Conveyor: 54"
Height
Operating: 16' 8" | Travel: 11' 10" | Discharge Conveyor: 16' 8"
Ground Clearance
18"
Capacities
Fuel Capacity
300 US gal
Hydraulic Capacity
90 US gal
Weights
Weight
Machine: 72,500 lbs
Features
Features
Number of Bits: 22 drum rotor, 20 pinned rotor | Number of Grate Sections: 4
Track Type
Track Type & Width: triple grouser, 23.5"