Van Keppel

1801 N. 9th St.
Kansas City, KS 66101
Call Us: (913) 281-4800
https://www.vankeppel.com/

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

Information

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

THE PETERSON 5000H WHOLE TREE CHIPPER PRODUCES HIGH QUALITY LOW BARK CONTENT CHIPS FOR WOOD PULP AND PELLETS, PROCESSING WHOLE TREES IN ONE CONTINUOUS OPERATION.

Equipped with a large feed throat, the 5000H Whole Tree Chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems.

Photos

Highlights

LocationKansas City, Kansas
Year2024
MakeASTEC Mobile Screens
ModelPeterson 5000H Whole Tree Chipper C27
EngineModel: C27
StatusAvailable
WidthOperating: 11' 9" | Travel: 11' 7" | Feed Opening: 53"
HeightTravel: 13' 6" | Feed Opening: 24"

Specifications

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27
Year2024
ManufacturerASTEC Mobile Screens
Model NamePeterson 5000H Whole Tree Chipper
Trim NameC27
Generic Type (Primary)General
EngineModel: C27
Engine ManufacturerCAT
Engine PowerC27: 950 hp or 1050 hp
Drivetrain
ClutchPT Tech HPTO 15
Drive Controltwo lever electronic joystick
Operational
Operating SpeedFeed Speed Range: 64 to 170 ft/min | Flail Speed Range: 400 to 700 rpm
Hydraulics
Hydraulic TypeHydraulic Knuckle Boom: 2-section, 26' 10"
DimensionsAxle Spacing: 60" | Maximum Log Diameter: 23" | Drum Size: heavy duty, 66" diameter | Chip Size: 1/2" to 1 1/4" | Grapple with Heel Rack: 360° rotation, 42" | Drum Diameter: 11" | End Discharge Bark Mover: 120" x 24"
LengthOperating: 51' 3" | Travel: 53' 6" | Frame: 50' 6"
WidthOperating: 11' 9" | Travel: 11' 7" | Feed Opening: 53"
HeightTravel: 13' 6" | Feed Opening: 24"
Ground Clearance13" | Front: 2' 11" | Rear: 10"
WheelsFront to 5th Wheel: 2' 2" | 5th Wheel to Center Axle: 41' 9" | 5th Wheel to Rear Axle: 46' 8" | 5th Wheel Height: 4' 2"
Capacities
Fuel Capacity375 gal
Hydraulic Capacity320 gal
Hitch Lift Capacity11,851 lbs at 15'
Weights
Weighttri-Axle: 59,960 lbs | 5th Wheel: 45,000 lbs | Total: 103,500 lbs
FeaturesFeed Rolls: dual with floating top rolls | Lower Feed Rolls: 7 powered | Knife Pockets: 3 or 4 pockets | Knife System: Babbitt or Key Knife™ | Discharge Spout: hydraulic swivel top or end loading | Enclosed Weatherized Operator's Cab: with Air Conditioner | Flail Drums: single lower and dual floating upper | Flail Rods/Drum: 6 per drum | Flail Chain/Drum: 78 chains, 8 links each | Drive Type: hydrostatic | Variable Flail Speed: adjustable from cab