Current ASTEC Mobile Screens Forestry-Environmental-Recycling Drum-Disc-Chippers Disc-Chippers Peterson 5000H Whole Tree Chipper

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

Swipe to View More

  • Year 2024
  • Make ASTEC Mobile Screens
  • Model Peterson 5000H Whole Tree Chipper
  • Engine Model: C27
Shop ASTEC Mobile Screens Pre-Owned
Product Details Specifications Photos
2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

  • Year 2024
  • Manufacturer ASTEC Mobile Screens
  • Model Name Peterson 5000H Whole Tree Chipper
  • Trim Name C27
  • Generic Type (Primary) General
  • Engine Manufacturer CAT
  • Engine Model: C27
  • Engine Power C27: 950 hp or 1050 hp

2024 ASTEC Mobile Screens Peterson 5000H Whole Tree Chipper C27

THE PETERSON 5000H WHOLE TREE CHIPPER PRODUCES HIGH QUALITY LOW BARK CONTENT CHIPS FOR WOOD PULP AND PELLETS, PROCESSING WHOLE TREES IN ONE CONTINUOUS OPERATION.

Equipped with a large feed throat, the 5000H Whole Tree Chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems.

Engine

Engine Manufacturer CAT
Engine Model: C27
Engine Power C27: 950 hp or 1050 hp

Drivetrain

Clutch PT Tech HPTO 15
Drive Control two lever electronic joystick

Operational

Operating Speed Feed Speed Range: 64 to 170 ft/min | Flail Speed Range: 400 to 700 rpm

Hydraulics

Hydraulic Type Hydraulic Knuckle Boom: 2-section, 26' 10"

Dimensions

Dimensions Axle Spacing: 60" | Maximum Log Diameter: 23" | Drum Size: heavy duty, 66" diameter | Chip Size: 1/2" to 1 1/4" | Grapple with Heel Rack: 360° rotation, 42" | Drum Diameter: 11" | End Discharge Bark Mover: 120" x 24"
Length Operating: 51' 3" | Travel: 53' 6" | Frame: 50' 6"
Width Operating: 11' 9" | Travel: 11' 7" | Feed Opening: 53"
Height Travel: 13' 6" | Feed Opening: 24"
Ground Clearance 13" | Front: 2' 11" | Rear: 10"
Wheels Front to 5th Wheel: 2' 2" | 5th Wheel to Center Axle: 41' 9" | 5th Wheel to Rear Axle: 46' 8" | 5th Wheel Height: 4' 2"

Capacities

Fuel Capacity 375 gal
Hydraulic Capacity 320 gal
Hitch Lift Capacity 11,851 lbs at 15'

Weights

Weight tri-Axle: 59,960 lbs | 5th Wheel: 45,000 lbs | Total: 103,500 lbs

Features

Features Feed Rolls: dual with floating top rolls | Lower Feed Rolls: 7 powered | Knife Pockets: 3 or 4 pockets | Knife System: Babbitt or Key Knife™ | Discharge Spout: hydraulic swivel top or end loading | Enclosed Weatherized Operator's Cab: with Air Conditioner | Flail Drums: single lower and dual floating upper | Flail Rods/Drum: 6 per drum | Flail Chain/Drum: 78 chains, 8 links each | Drive Type: hydrostatic | Variable Flail Speed: adjustable from cab

Product Photography