Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- New
- In Stock
- Aggregate Equipment
- Conveyor
SERIES 33 36” X 150’ SUPER STACKER
MAIN CONVEYOR EQUIPPED AS FOLLOWS:
FRAME – 80’ (24.4 m) long c/c with 70” (1780 mm) deep frame
UNDERCARRIAGE – Heavy duty v-type with twin cylinder raise and cylinder covers; 10 HP (7.5 kW) electric / hydraulic power pack to operate lift cylinders, power travel drives and extendable conveyor travel; Axle – gullwing axle assembly. Includes: walking beam travel axle with eight (8) 11-22.5 tires, four (4) 385/65D-19.5 radial travel tires, less cylinders. A stiff arm shall be provided in place of the fold down cylinders. King pin, air brakes, travel, brake and directional lights, mud flaps, hydraulic planetary power travel drives for two wheel drive, cam arm-style rear undercarriage to maintain constant wheel radius when raising and lowering conveyor; A center heavy duty tow eye is included for positioning within the pit
DRIVE ASSEMBLY – Head end, v-belt drive for 425 FPM (2.2 m/s) belt speed
Capacity – 850 TPH (770 MTPH) of 100 pcf (1.6 T/m3) material
Motor – 30 HP (22 kW) electric, 1800 RPM, TEFC 3/60/460, with starters & wiring
Reducer – Class I, Dodge TA5215 shaft mount
Backstop – Internal type in reducer
PULLEYS
Head Pulley – 16” (406 mm) grooved rubber lagged, Dodge bearings; Tail pulley – 14” (356 mm) steel wing, Dodge bearings
TAKE-UP – screw type
IDLERS - CEMA “B” 5” (127 mm) diameter, steel roll, sealed for life ball bearings
Load Area Idlers – 20 degree close spaced under receiving trough
Troughing Idlers – 35 degree on 4’ (1220 mm) spacing
Return Idlers – flat rolls on 8’ (2440 mm) spacing
RADIAL RECEIVING HOPPER – (Rock box style) 6’ (1830 mm) long with adjustable rubber flashing
ANCHOR PIVOT – Anchor pivot for radial travel
BELT – Grade 2, 2 ply, 220 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) mechanical fasteners
EXTENDABLE CONVEYOR EQUIPPED AS FOLLOWS:
FRAME – 74’ (22.5 m) long with 54” (1370 mm) deep truss with head section
EXTENDABLE CONVEYOR – extendable conveyor moves in and out with a cable and hydraulic winch system (winch located in main frame conveyor) to extend the conveyor to 150 feet (46 m)
DRIVE ASSEMBLY – Head end, v-belt drive for 630 FPM (3.2 m/s) belt speed
Capacity – 850 TPH (770 MTPH) of 100 pcf (1.6 T/m3) material
Motor – 30 HP electric, 1800 RPM, TEFC 3/60/460, with starters & wiring
Reducer – Class I, Dodge TA4207 shaft mount
Backstop – Internal type in reducer
PULLEYS
Head Pulley – 16” (406 mm) grooved rubber lagged, Dodge bearings; Tail pulley – 14” (356 mm) steel wing, Dodge bearings
TAKE-UP – screw type
IDLERS - CEMA “B” 5” (127 mm) diameter, steel roll, sealed for life ball bearings
Troughing Idlers – 35 degree on 4’ (1220 mm) spacing
Return Idlers – flat rolls on 8’ (2440 mm) spacing
BELT – Grade 2, 2 ply, 220 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) mechanical fasteners
ELECTRICAL - NEMA 4 (IP65) enclosure with main disconnect mounted on the rear undercarriage member; all starters and wiring to motors; start/stop pushbuttons for main conveyor motor, extendable conveyor motor, hydraulic power pack motor; Cord holders and supports for power cable; LESS power cable – 460 volt, 3 phase, 60 hertz power required
MANUAL CONTROL SYSTEM –the following hydraulic functions are manually controlled by switches on the electrical panel: power radial travel; conveyor raise and lower; extend and retract the telescoping conveyor section
PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
OPTIONAL EQUIPMENT INCLUDED IN STOCK UNIT
CEMA C Idlers vs. CEMA B
Belting Grade 2, 3 ply, 330 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) covers vs. standard
Belt Cleaners (2) – Martin with tensioner
Manual Landing Jacks (pin lock design)
Wizard Touch Automated Control System - Includes touch screen PLC operation allows for either factory pre-set or operator in-put parameters to control the power travel, conveyor raise and lower and telescoping of the extendable conveyor; radial travel limit switches and rotat
MAIN CONVEYOR EQUIPPED AS FOLLOWS:
FRAME – 80’ (24.4 m) long c/c with 70” (1780 mm) deep frame
UNDERCARRIAGE – Heavy duty v-type with twin cylinder raise and cylinder covers; 10 HP (7.5 kW) electric / hydraulic power pack to operate lift cylinders, power travel drives and extendable conveyor travel; Axle – gullwing axle assembly. Includes: walking beam travel axle with eight (8) 11-22.5 tires, four (4) 385/65D-19.5 radial travel tires, less cylinders. A stiff arm shall be provided in place of the fold down cylinders. King pin, air brakes, travel, brake and directional lights, mud flaps, hydraulic planetary power travel drives for two wheel drive, cam arm-style rear undercarriage to maintain constant wheel radius when raising and lowering conveyor; A center heavy duty tow eye is included for positioning within the pit
DRIVE ASSEMBLY – Head end, v-belt drive for 425 FPM (2.2 m/s) belt speed
Capacity – 850 TPH (770 MTPH) of 100 pcf (1.6 T/m3) material
Motor – 30 HP (22 kW) electric, 1800 RPM, TEFC 3/60/460, with starters & wiring
Reducer – Class I, Dodge TA5215 shaft mount
Backstop – Internal type in reducer
PULLEYS
Head Pulley – 16” (406 mm) grooved rubber lagged, Dodge bearings; Tail pulley – 14” (356 mm) steel wing, Dodge bearings
TAKE-UP – screw type
IDLERS - CEMA “B” 5” (127 mm) diameter, steel roll, sealed for life ball bearings
Load Area Idlers – 20 degree close spaced under receiving trough
Troughing Idlers – 35 degree on 4’ (1220 mm) spacing
Return Idlers – flat rolls on 8’ (2440 mm) spacing
RADIAL RECEIVING HOPPER – (Rock box style) 6’ (1830 mm) long with adjustable rubber flashing
ANCHOR PIVOT – Anchor pivot for radial travel
BELT – Grade 2, 2 ply, 220 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) mechanical fasteners
EXTENDABLE CONVEYOR EQUIPPED AS FOLLOWS:
FRAME – 74’ (22.5 m) long with 54” (1370 mm) deep truss with head section
EXTENDABLE CONVEYOR – extendable conveyor moves in and out with a cable and hydraulic winch system (winch located in main frame conveyor) to extend the conveyor to 150 feet (46 m)
DRIVE ASSEMBLY – Head end, v-belt drive for 630 FPM (3.2 m/s) belt speed
Capacity – 850 TPH (770 MTPH) of 100 pcf (1.6 T/m3) material
Motor – 30 HP electric, 1800 RPM, TEFC 3/60/460, with starters & wiring
Reducer – Class I, Dodge TA4207 shaft mount
Backstop – Internal type in reducer
PULLEYS
Head Pulley – 16” (406 mm) grooved rubber lagged, Dodge bearings; Tail pulley – 14” (356 mm) steel wing, Dodge bearings
TAKE-UP – screw type
IDLERS - CEMA “B” 5” (127 mm) diameter, steel roll, sealed for life ball bearings
Troughing Idlers – 35 degree on 4’ (1220 mm) spacing
Return Idlers – flat rolls on 8’ (2440 mm) spacing
BELT – Grade 2, 2 ply, 220 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) mechanical fasteners
ELECTRICAL - NEMA 4 (IP65) enclosure with main disconnect mounted on the rear undercarriage member; all starters and wiring to motors; start/stop pushbuttons for main conveyor motor, extendable conveyor motor, hydraulic power pack motor; Cord holders and supports for power cable; LESS power cable – 460 volt, 3 phase, 60 hertz power required
MANUAL CONTROL SYSTEM –the following hydraulic functions are manually controlled by switches on the electrical panel: power radial travel; conveyor raise and lower; extend and retract the telescoping conveyor section
PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
OPTIONAL EQUIPMENT INCLUDED IN STOCK UNIT
CEMA C Idlers vs. CEMA B
Belting Grade 2, 3 ply, 330 PIW, 3/16” (5 mm) x 1/16” (1.5 mm) covers vs. standard
Belt Cleaners (2) – Martin with tensioner
Manual Landing Jacks (pin lock design)
Wizard Touch Automated Control System - Includes touch screen PLC operation allows for either factory pre-set or operator in-put parameters to control the power travel, conveyor raise and lower and telescoping of the extendable conveyor; radial travel limit switches and rotat
- New
- 2023
- Astec
- 33-36150
- Aggregate Equipment
- Conveyor
- 420340
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.