Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- New
- In Stock
- Aggregate Equipment
- Crusher
3055 PORTABLE PRIMARY CRUSHING PLANT
PIONEER VIBRATING FEEDER 50" X 20' HORIZONTAL TYPE TO INCLUDE:
Vibrator Mechanism - with two shafts, bearings, timing gears, and driven sheave with oil lube
5' Adjustable and Replaceable Grizzly Bar Section - (4" nominal grizzly bar spacing)
Suspension Springs. Cups and Brackets
Separate "pivoted-type" Motor Mount
Paint - Two-part urethane primer, two-part urethane topcoat – Factory standard color(s).
Optional Pan Deck Liners - 3/4" AR
PIONEER 3055 JAW CRUSHER TO INCLUDE:
Overhead eccentric type with spherical roller bearings, single side plate welded steel base with replaceable jaw die retention lips; heavy duty Pioneer style flywheels, hydraulic wedge type adjust with auto tension, with 2 HP 460 volt electric / hydraulic power pack
Manganese steel jaws with wedge holding system and AR steel side wear plates.
Barrel protector plate, replaceable jaw die retention lips on pitman.
Grease lubrication with Auto Lube.
Fabreeka mounting pads.
Paint - Two-part urethane primer, two-part urethane topcoat – Factory standard color(s).
200 HP TEFC Electric Motor at 1200 RPM.
V-belt Drives & Guard
Non-Drive Side Flywheel Guard (fiberglass).
Pivoting Motor Mount.
Modernized Jaw with Tramp Iron Relief (TIR) System with 7 ½ HP electric / hydraulic power pack with HMI panel, including 50' of cable, for adjustment control (LESS starter and wiring), in lieu of wedge adjust.
Heavy Duty jaw dies vs. standard jaw dies.
TO BE MOUNTED ON PEERLESS PORTABLE JAW 3055 PRIMARY PLANT:
Main Frame: Heavy Duty I-beam construction.
Suspension: Triple axle suspension.
Tires: Twelve 11.00 X 22.5 tires mounted on 10-hole Budd wheels.
Brakes: Air brakes on all axles.
Cribbing: Six cribbing supports.
Highway travel items: mud flaps and tail lights.
Feeder Module:
Feeder Hopper: 5/8" plate construction with 5/8"x8"x8" angle
Feeder Support: Heavy duty W8x#31 I-beam construction.
By-pass Chute: 3/8" plate construction. No conveyor.
Hopper Wings: for wheel loader / excavator loading
Feeder Drive:
Motor: WEG 40HP 1800-RPM 440V 60Hz 286T TEFC.
V-belt Drive: Motor sheave, v-belts and drive guard
Crusher Area:
Undercrusher Hopper: 3/8" & 1/2" plate construction.
Lower Platform: access to the crusher drive area.
Platforms Access: ladders.
Crusher Drive:
Motor: By others
Motor Base: By Others
V-belt Drive: By Others
48"x34' Front Delivery Conveyor:
Drive: Class II head end.
Gear Reducer: Dodge TAII Shaft Mount.
Backstop: Included.
Motor: 20HP 1800-RPM 440V 60Hz 254T TEFC.
V-belt Drive: Dodge with drive guard
Belt Speed: 350 fpm
Drive Pulley: Heavy-Duty 14" diameter, 3/8" herringbone lagged drum.
Tail Pulley: Heavy-Duty 12" diameter, wing type pulley.
Shafts: 1045 turned and polished.
Bearings: Dodge SCM Pillow Block.
Take-ups: Telescopic Screw type.
Belting: 3-ply 3/16" x 1/16 #330 PIW.
Belt splice: Flexco.
Idlers: CEMA B5" dia. 20 Deg sealed for life ball bearings.
Impact Slide: Included
Return: return idlers on 10' spacing.
Belt Cleaner: Martin Pit Viper belt cleaner with tensioner.
Run-On Jacks - 5" bore with 36" stroke (30" actual lift) with hydraulic tank, valve bank, plumbing and fixtures
Electrical Switchgear Package To Include: 480 Volt AC / 120V control, Outdoor enclosure with 800AMP main, 2500HP soft start HD rated, 40HP NEMA starter for VGF, 20HP under crusher conveyor, Panel mounted within 20' of crusher frame
Optional Heavy- Duty Truck Frame Mounted Rock Feed Hopper:
Hopper Construction: Overall hopper dimensions are 18' long by 18' – 6" wide, Two 18' long lower sloped sidewalls, Two 9' long upper vertical sidewall extensions add an additional 3' to hopper height, Back wall sloped at 45 degrees tying the two lower and upper side wall, extensions together
Hopper construction is made of 5/8" thick steel plate, Six diagonal supports (3 on each side) tie hopper back to truck frame, Tw
PIONEER VIBRATING FEEDER 50" X 20' HORIZONTAL TYPE TO INCLUDE:
Vibrator Mechanism - with two shafts, bearings, timing gears, and driven sheave with oil lube
5' Adjustable and Replaceable Grizzly Bar Section - (4" nominal grizzly bar spacing)
Suspension Springs. Cups and Brackets
Separate "pivoted-type" Motor Mount
Paint - Two-part urethane primer, two-part urethane topcoat – Factory standard color(s).
Optional Pan Deck Liners - 3/4" AR
PIONEER 3055 JAW CRUSHER TO INCLUDE:
Overhead eccentric type with spherical roller bearings, single side plate welded steel base with replaceable jaw die retention lips; heavy duty Pioneer style flywheels, hydraulic wedge type adjust with auto tension, with 2 HP 460 volt electric / hydraulic power pack
Manganese steel jaws with wedge holding system and AR steel side wear plates.
Barrel protector plate, replaceable jaw die retention lips on pitman.
Grease lubrication with Auto Lube.
Fabreeka mounting pads.
Paint - Two-part urethane primer, two-part urethane topcoat – Factory standard color(s).
200 HP TEFC Electric Motor at 1200 RPM.
V-belt Drives & Guard
Non-Drive Side Flywheel Guard (fiberglass).
Pivoting Motor Mount.
Modernized Jaw with Tramp Iron Relief (TIR) System with 7 ½ HP electric / hydraulic power pack with HMI panel, including 50' of cable, for adjustment control (LESS starter and wiring), in lieu of wedge adjust.
Heavy Duty jaw dies vs. standard jaw dies.
TO BE MOUNTED ON PEERLESS PORTABLE JAW 3055 PRIMARY PLANT:
Main Frame: Heavy Duty I-beam construction.
Suspension: Triple axle suspension.
Tires: Twelve 11.00 X 22.5 tires mounted on 10-hole Budd wheels.
Brakes: Air brakes on all axles.
Cribbing: Six cribbing supports.
Highway travel items: mud flaps and tail lights.
Feeder Module:
Feeder Hopper: 5/8" plate construction with 5/8"x8"x8" angle
Feeder Support: Heavy duty W8x#31 I-beam construction.
By-pass Chute: 3/8" plate construction. No conveyor.
Hopper Wings: for wheel loader / excavator loading
Feeder Drive:
Motor: WEG 40HP 1800-RPM 440V 60Hz 286T TEFC.
V-belt Drive: Motor sheave, v-belts and drive guard
Crusher Area:
Undercrusher Hopper: 3/8" & 1/2" plate construction.
Lower Platform: access to the crusher drive area.
Platforms Access: ladders.
Crusher Drive:
Motor: By others
Motor Base: By Others
V-belt Drive: By Others
48"x34' Front Delivery Conveyor:
Drive: Class II head end.
Gear Reducer: Dodge TAII Shaft Mount.
Backstop: Included.
Motor: 20HP 1800-RPM 440V 60Hz 254T TEFC.
V-belt Drive: Dodge with drive guard
Belt Speed: 350 fpm
Drive Pulley: Heavy-Duty 14" diameter, 3/8" herringbone lagged drum.
Tail Pulley: Heavy-Duty 12" diameter, wing type pulley.
Shafts: 1045 turned and polished.
Bearings: Dodge SCM Pillow Block.
Take-ups: Telescopic Screw type.
Belting: 3-ply 3/16" x 1/16 #330 PIW.
Belt splice: Flexco.
Idlers: CEMA B5" dia. 20 Deg sealed for life ball bearings.
Impact Slide: Included
Return: return idlers on 10' spacing.
Belt Cleaner: Martin Pit Viper belt cleaner with tensioner.
Run-On Jacks - 5" bore with 36" stroke (30" actual lift) with hydraulic tank, valve bank, plumbing and fixtures
Electrical Switchgear Package To Include: 480 Volt AC / 120V control, Outdoor enclosure with 800AMP main, 2500HP soft start HD rated, 40HP NEMA starter for VGF, 20HP under crusher conveyor, Panel mounted within 20' of crusher frame
Optional Heavy- Duty Truck Frame Mounted Rock Feed Hopper:
Hopper Construction: Overall hopper dimensions are 18' long by 18' – 6" wide, Two 18' long lower sloped sidewalls, Two 9' long upper vertical sidewall extensions add an additional 3' to hopper height, Back wall sloped at 45 degrees tying the two lower and upper side wall, extensions together
Hopper construction is made of 5/8" thick steel plate, Six diagonal supports (3 on each side) tie hopper back to truck frame, Tw
- New
- 2025
- Astec
- 3055 Jaw
- Aggregate Equipment
- Crusher
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.